||Form Factor: 10U modular enclosure holds up to eight full-height, sixteen half-height or thirty-two quarter-height blade servers
||17.3" Height17.6" Width29.7 DeepWeight:Empty Chassis Only - 98 lbsChassis with all rear modules (IOMs, PSUs, CMCs, KVM) - 176 lbsMax fully loaded with blades and rear modules - 394 lbs
||Supports:6x 3000W High-Efficiency Power Supplies6x 2700W High-Efficiency Power Supplies6x -48V DC 2700W Power SuppliesSupported Power Supply Configurations:3+3 and 2+2 (Grid Redundancy)2+1, 3+1, 4+2 and 5+1 (Power Supply Redundancy)2+0, 3+0 (Non-Redundant Mode)M1000e chassis supports dynamic power supply engagement (DPSE) mode, which if enabled, puts lightly loaded power supplies into standby mode, driving up the utilization and the efficiency of the active supplies. Dell supports either 110-120v or 208-240v AC power supply input and supports a wide range of power distribution options. Dell recommends 208-240V AC for all production environments.
||M1000e chassis comes standard with nine hot-pluggable, redundant fan modules. The fans deliver low power consumption, but also use next generation fan technologies to ensure the lowest possible amount of fresh air is consumed to cool the enclosure.
||Front control panel with interactive graphical LCD:Supports initial configuration wizardLocal server blade, enclosure, and module information and troubleshootingTwo USB Keyboard/Mouse connections and one video connection (requires the optional Avocent® iKVN switch to enable these ports) for local front 'crash cart' console connections that can be switched between blades.
|Enclosure I/O Modules
||Up to six total blade I/O modules for three fully redundant fabrics that take advantage of a fully passive midplane that can scale up to 8.4Tbps with current technologies featuring 1/10Gb Ethernet to servers, 40Gb Ethernet to top-of-rack switches, Fibre channel 8Gb, and InfiniBand QDR/FDR10/FDR. Dell's blade Ethernet devices also have FlexIO technology, providing on-demand uplink scalability and investment protection unrivaled in the blade server market.Dell PowerEdge M I/O AggregatorSupports Active System Manager and CMC Aggregator GUI. 1/10Gb Ethernet connectivity with Zero touch FCoE and converged iSCSI delpoyment. 32 internal 10GE ports provide full redundancy to the M Series blade on fabric A.Dell Networking MXL 10/40Gb Ethernet SwitchConverged 1/10/40Gb Ethernet switch with up to 56-10GE ports (32 internal), converged iSCSI and FCoE (transit to ToR), 320Gb stacking of up to 6 switches, FlexIO technology, and PVST+ industry standard spanning tree. 32 internal 10GE ports provide full redundancy to the M Series blade on Fabric A.Dell PowerConnect™ M8024-K 10Gb Ethernet SwitchConverged 1/10Gb Ethernet switch with up to 24-10GE ports (16 internal), converged FCoE (transit to ToR), stacking of up to 6 modules, FlexIO technology, and simple mode. Dell PowerConnect M6220 Gigabit Ethernet Switch1Gb Ethernet switch with up to 24 ports (16 internal), stacking of up to 12 switches, simple mode, and 4 x fixed copper 10/100/1000mb Ethernet uplinks and FlexIO technology for up to four additional 10GbE uplinks.Dell PowerConnect M6348 Gigabit Ethernet Blade Switch1Gb Ethernet switch with up to 48 ports (32 internal), stacking of up to 12 modules, simple mode, and 16 external fixed 10/100/1000Mb Ethernet RJ-45 ports to support 32 internal server GbE connections supplied by quad-port Gigabit Ethernet adapters plus up to four 10Gb uplink ports.Dell 10Gb Gigabit Ethernet Pass-Through -k ModuleSupports 16 x 10Gb connections onlyCisco® Nexus™ B22Dell Fabric Extender (FEX)16 internal 10GbE ports and 8 external 10GbE ports; provides 10GbE connectivity to Cisco Nexus 5500 series infrastructureCisco Catalyst Blade Switch M 3130GIncludes 4 x fixed copper 10/100/1000Mb Ethernet uplinks, 64Gb (full duplex) StackWise® Plus stacking ports plus two optional module bays, each can support either 2 x 1Gb copper or optical SFPs.Cisco Catalyst Blade Switch M 3130XIncludes 4 x fixed copper 10/100/1000Mb Ethernet uplinks, 64Gb full duplex StackWise Plus stacking ports, and support for two x2 modules for up to a total of two 10Gb CX4 or SR/LRM uplinks.Broacde® M5424 8Gb Fibre Channel SwitchIncludes eight external SAN portsDell 8Gb/4Gb Fibre Channel SAN Module NPIV Port AggregatorEmulex® 8Gb or 4Gb/s Fibre Channel Pass-Through ModuleMellanox® M4001Q QDR, M4001T FDR10, M4001Q FDR InfiniBand® Switches16 internal ports and 16 external QSFP+ ports in a single wide form factorBrocade M6505 16Gb Fibre Channel SAN I/O Module24 x 16Gbps Fibre Channel ports (16 internal server ports and 8 external fabric ports). Zero footprint, hot-pluggable design with no additional fans or power supplies. Dynamic Ports on Demand (PoD) and 'Pay-as-you-grow' port upgrades for 12-port configurations.
||One (standard) or a second optional (redundant) Chassis Management Controller(s) (CMC)- Single, secure interface for inventory, configuration, monitoring, and alerting for the chassis and all components- Multi-chassis management that allows up to nine chassis and 288 servers to be managed from a single, embedded, agent-less interface- Automated and embedded one-to-many blade BIOS and firmware updates, independent of the operating system through the Integrated Dell Remote Access Controller (iDRAC)- One-to-many blade server BIOS capture and replication- Real-tim power/thermal monitoring and management- Real-tim system AC power consumption with resettable peak and minimum values- System-level power limiting and slot-based power prioritization- DPSE functionality to help lower overall system power consumption by ensuring power supplies run at their optimal efficiency points- Fan speed control using Dell's enhanced efficiency tehnologies to ensure fans are delivering optimal cooling while minimizing power consumption and airflow- Secure web (SSL) and command-line (Telnet/SSH) interfacesMultiple levels of user roles and permissions, including integration into Microsoft Active Directory Services and Lightweight Directory Access Protocol (LDAP) services for authentication- Two 10/100/1000Mb Ethernet ports + on serial port- Single point of connection from management network to iDRAC on each of the servers and the management interaces on the integrated I/O modules- Second Ethernet port supports daisy chaining of CMCs for improved cable managementOptional Integrated Avocent® keyboard, video and mout (iKVM) switch- Enables USB keyboard/mouse and video port on front control panelDell OpenManage™ Systems Management- Dell OpenManage™ Server Administrator - monitoring agents and one-to-one management utilities- Dell OpenManage™ Essentials - discover, inventory, monitor, and update M100e chassis and blade servers- Integration with third-party management solutions through Dell's Certified Partner Program- Remote management
|Additional Storage Options
||Internal: Dell EqualLogic™ PS-M4110 Blade ArrayExternal: Dell Compellent™, EqualLogic and PowerVault™ storage
||RapidRails™ static rails for 4-post square hole racksVersaRails™ static rails for 4-post square or unthreaded round hole racks
||1-Year Parts Replacement Warranty