(800) 327-0730CONTACT US
0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Dell PowerEdge 2950_III Rack Server

 

Dell PowerEdge 2950_III Rack Server

2950_III

The Dell PowerEdge 2950 Gen3 is Dell's 9th generation server that helps to reduce complexity involved in managing data for large or small businesses. The PowerEdge 2950 Gen 3 can support up to 6 internal 3.5 hard drives or 8 internal 2.5 hard drives to provide up to 4.5TB of storage which helps to conserve valuable data while supplying enough storage for future expandability.

The PowerEdge 2950_III was designed to keep up with changing environments and requirements. The server includes several embedded functions, like dual Gigabit NICs, Integrated SAS storage controller and 3 PCI-e slots. The PowerEdge 2950 can support up to 32GB of fully-buffered DIMM memory.




Dell PowerEdge 2950 Gen3 Technical Specifications

Technical Specifications for Dell PowerEdge 2950_III
Form Factor 2U Rack
Processors Up to two Quad-Core Intel Xeon 5300 series processors at up to 3.00GHz
Up to two Quad-Core Intel Low Volt Xeon 5300 series processors at up to 2.00GHz
Up to two Dual-Core Intel Xeon 5100 series processors at up to 3.00GHz
Up to two Dual-Core Intel Low Volt Xeon 5100 series processors at 2.33GHz
Up to two Dual-Core Intel Xeon 5000 series processors at up to 3.00GHz
Processor Sockets 2
Front Side Bus Intel Xeon 5300 Series: Dual Independent 1066MHz or 1333MHz
Intel Xeon 5100 Series: Dual Independent 1066MHz or 1333MHz
Intel Xeon 5000 Series: Dual Independent 667MHz
Cache Intel Xeon 5300 Series: 2x4MB
Intel Xeon 5100 Series: 4MB
Intel Xeon 5000 Series: 2x2MB
Chipset Intel® 5000X
Memory Up to 32GB (8 FBD DIMM slots): 256MB/512MB/1GB/2GB/4GB Fully Buffered DIMMs (FBD) in matched pairs, 533MHz or 667MHz
I/O Slots Three PCI slots:
Three PCI-e Slots (one x4 with x8 connector and two x8 slots)
OR
Two PCI-X 64-bit/133MHz and one PCI-e x8 slot
Drive Controller 4 port SAS 5/i Integrated SAS Controller (non-RAID)
RAID Controller PERC 5/i Integrated RAID Controller with 256MB Cache
PERC 4e/DC
PERC 5/e Adapter
Drive Bays 3 Hard Drive Options:
8 x 2.5" Hard Drive Option: Up to 8 SAS 10K HDDs
4 x 3.5" Hard Drive Option: Up to 4 SAS (10K, 15K) or SATA (7.2K) HDDs
6 x 3.5" Hard Drive Option: Up to 6 SAS (10K, 15K) or SATA (7.2K) HDDs
Maximum Internal Storage Up to 4.5TB: Six 750GB 7.2K SATA HDDs
Hard Drives 2.5" SAS (10K): 36GB, 73GB
3.5" SAS (10K): 73GB, 146GB, 300GB, 400GB
3.5" SAS (15K): 36GB, 73GB, 146GB
3.5" SATA (7.2K): 80GB, 160GB, 250GB, 500GB, 750GB
Power Supplies AC configuration with standard single or redundant 750w hot-plug auto-switching universal 110/220v AC power supplies
DC configuration with single or redundant hot-plug -48 to -60 V20 A DC power supplies
External Storage SAS, SCSI, and Fibre Channel Storage Systems
Tape Backup Options Internal: PV100T (DAT 72) with multibay
External: PowerVault DAT 72, 110T, 114T, 122T, 124T, 132T, 136T, 160T, and ML6000
Network Interface Card Dual embedded Broadcom® NetXtreme II™ 5709 Gigabit Eithernet NIC with fail-over and load balancing. TOE (TCPIP Offload Engine) supported on Microsoft Windows Server 2003, SP1 or higher with Scalable Networking Pack
Availability ECC FBD Memory, SDDC, Spare Bank
Hot-plug hard drives
Optional hot-plug redundant power supplies
Dual embedded NICs with failover and load balaning support
Optional PERC5/i Integrated daughtercard controller with battery-backed cache
Hot-plug redundant cooling
Tool-less chassis
Fibre and SCSI cluster support
Validated for Dell/EMC SAN
Remote Management Standard Baseboard Management Controller with IMPI 2.0 support
Optional DRAC5 for advanced capabilities
Systems Management Dell OpenManage™
Rack Support 4-Post (Dell Rack)
2-Post and 3rd party Versa rails, sliding rails and Cable Management Arm (CMA)
Operating Systems Microsoft® Windows Server 2003 R2
Microsoft® Windows® Storage Server 2003 R2
Red Hat® Linux® Enterprise v4, ES and ES EM64T
SUSE Linux Enterprise Server 9 EM64T